====== Introduction to IoT ======
Welcome to Day 1 of our IoT Workshop! Today, we introduced the basics of IoT through presentations and hands-on activities, covering topics from setting up your development environment to hardware essentials and simple programming.

===== 1. IoT Intro Presentation =====
{{pdfjs 500px>:latinet:unicaes:workshops:intro_to_iot.pdf?75}}

===== 2. Setup Development Environment =====

  * [[https://code.visualstudio.com/download|VS Code]].
  * Install Platformio extensions
  * (in some cases) Install the missing USB Driver for the [[https://www.silabs.com/software-and-tools/usb-to-uart-bridge-vcp-drivers?tab=downloads | CP210x USB to UART Bridge]]


===== 3. Hardware Review =====

  * [[https://courses.eolab.de/amc/core-kit|AMC Core Kit by EOLab]]
  * [[https://courses.eolab.de/amc/handbook/breadboard | Breadboard Overview]]
===== 5. Coding Warm-up =====

Now let's check if your Microcontroller works. Also, you will learn how to upload your first sketch. Basic Blink example:

<file cpp main.cpp>
#include "Arduino.h"

void setup() {
  // initialize digital pin LED_BUILTIN as an output.
  pinMode(LED_BUILTIN, OUTPUT);
}

// the loop function runs over and over again forever
void loop() {
  digitalWrite(LED_BUILTIN, HIGH);  // turn the LED on (HIGH is the voltage level)
  delay(1000);                      // wait for a second
  digitalWrite(LED_BUILTIN, LOW);   // turn the LED off by making the voltage LOW
  delay(1000);                      // wait for a second
}
</file>


{{url>https://gfycat.com/ifr/BlissfulCriminalAnemoneshrimp 400,300 noborder fullscreen}}