Differences

This shows you the differences between two versions of the page.

--- user:adiel001 [2022/06/29 12:17] – [2.1 Materials] adiel001
+++ user:adiel001 [2022/06/29 14:42] (current) – adiel001
@@ Line 7: / Line 7: @@
   * Only a superuser can add a picture
-===== Building Optimization =====
-A. Batson (28067), A. Akuri (29630), G. Ciobanu (29427)
-(AMC 2022 Project can be found here [[Building Optimization]] . Until the page is available, edits will be made here. )
-==== 1.0 Introduction =====
-As the urgency to mitigate and combat climate change grows, more and more solutions are required to forder a more sustainable world. On the radar for these solutions, energy conservation and consumption reduction techniques comprise a significant measure in realizing greater sustainability in home & industry (Mahiri et al. 2022). However, one of the greatest limitations in realizing these developments is human contingent, for example forgetting to turn/off lights and heating. This project targets energy use optimization by smart control of lights and heating use in prototye designed to simplify a building.
-By utilization of a microcontroller, a relay and two sensors to record, interpret values and automatically perform specific actions in order to minimize wastage of energy.
-==== 2.0 Materials & Method ====
-=== 2.1 Materials & Sofware ===
-  *  LDR Photoresistor
-  *  DHT11 Temperature Sensor
-  *  SPDT Relay
-  *  ESP32 Connection & MQTT
-  *  Node-Red
-  *  InfluxDB
-  *  Grafana
-==== 3.0 Results ====
-==== 4.0 Discussion ====
-==== 5.0 References ====
-Mahiri, F., Najoua, A., & Ben Souda, S. (2022). 5G-Enabled IIoT Framework Architecture Towards Sustainable Smart Manufacturing. In International Journal of Online & Biomedical Engineering; 2022, Vol (Bd. 16, Nummer 4, S. 4–20). https://doi.org/10.3991/ijoe.v18i04.27753