Differences

This shows you the differences between two versions of the page.

--- projects:wifi-cam:start [2024/07/06 11:03] – 22670_students.hsrw
+++ projects:wifi-cam:start [2024/07/06 11:37] (current) – 22670_students.hsrw
@@ Line 71: / Line 71: @@
 Then we need a Camera, and in our case, the **ESP32-S3 XIAO Sense** was a good option as it's very small, has low power consumption, includes a Wi-Fi module, and it's relatively cheap, costing around 13€. In the following table, you will find a list of parts used to develop this PCB.
-^ Part                      ^ Number  ^ Price €  ^ Comment  ^
+^ Part                      ^ Number  ^ Price €  ^ Provider   ^
-| ESP32-S3 XIAO Sense       | 1       | 13       |          |
+| ESP32-S3 XIAO Sense       | 1       | 36       |Amazon.de  |
-| IR333-A IR LED            | 4       | 0.49     |          |
+| IR333-A IR LED            | 4       | 0.49     |Everlight Electronics Co Ltd    |
-| BD139 NPN Transistor      | 1       | 0.6      |          |
+| BD139 NPN Transistor      | 10      | 6        |Amazon.de  |
-| Jumpers MM                | 25      | 6        |          |
+| Solar Charger BQ24074     | 1       | 14.20    |EXP tech   |
-| Solar Charger BQ24074     | 1       | 14.20    |          |
+| DC Battery 3.7V 2200 mAh  | 1       | 17       |Amazon.de  |
-| DC Battery 3.7V 2200 mAh  | 1       | 19       |          |
+| Resistors                 | 100     | 6       |Amazon.de  |
-| Resistors                 | 10      |          |          |
+| Solar Cell                | 1       |6.65      |reichelt.de|
-| Solar Cell                | 1       |          |          |
 *So let's first speak about some parts separately.*
@@ Line 90: / Line 89: @@
 {{:projects:wifi-cam:2.jpg?600|}}\\
-|As you can see, it comes in two parts which can be attached together, one part has the SoC and the other part has the Camera, Microphone, and the SD-Card slot.|
+|As you can see, it comes in two parts which can be attached together, one part has the SoC (System on chip) and the other part has the Camera, Microphone, and the SD-Card slot.|
+I have used Arduino IDE version 2.3.2 to upload the code to the board, but you have to adjust the IDE in a way so you can upload the code to the board without any errors. So, please do the following steps:
+. From Arduino IDE, go to **Tools**-**Board**-**Boards manager**
+         a. Arduino ESP32 Boards v2.0.13
+         b. esp32 v3.0.2 it only works on this version
+. From Arduino IDE, go to **Tools**-**Manage Libraries**
+         a. ArduinoHttpClient 0.6.0
+         b. Arduino_ESP32_OTA 0.3.0
+         c. ESP32 Mail Client 3.4.19
+ Here is a link for the code as I have uploaded all the files on a github repo.
+https://github.com/msherif503/ESP32S3_Take-photo_Send_Gmail.git
+--------------------------------------------------------------------------------------------